Embedded strings in code mpasm error

[Acetronics2]

Hi, Brian

As Malc gently tells ...

I am totally unable to understand what you are talking about... as long as your project is " top secret classified " !!!

Could you provide a piece of program with config part, and enough to understand what you try to do ... ???

I only suppose the " MCP23S17 " secret code appears somewhere ...

Could this help ??? http://www.picbasic.co.uk/forum/show...951&pagenumber=

Ok ... once more Darrel has striken here ... http://www.pbpgroup.com/modules/wfse...p?articleid=10


Alain

[BrianS]

My chip is a 18f4620.

This is basically the code (Below) I am trying to use. It did work just a few days ago but now is compiling with the error I had listed.
Really I am only posting the part of the code that is failing to compile. Problem with "Wout".

'****************************************************************
'*  Name    : STRINGS-16.PBP                                    *
'*  Author  : Darrel Taylor                                     *
'*  Date    : 6/12/2005                                         *
'*  Note:  Strings must be NULL Terminated                      *
'****************************************************************
DEFINE LOADER_USED 1       ' If using bootloader
DEFINE OSC 4
DEFINE HSER_TXSTA  24h     ' Use this for Higher Baud Rates
DEFINE HSER_SPBRG  25      ' 9600 Baud at 4mhz

Addr        var word
Char        var byte

Clear

goto StartLoop ' Required

String1:
@ da "This is a string",0

AnotherString:
@ da "Here is another string",0

'------------GetAddress Macro - Location insensitive -------------------------
ASM
GetAddress macro Label, Wout       ; Returns the Address of a Label as a Word
    CHK?RP Wout
    movlw low Label
    movwf Wout
    movlw High Label
    movwf Wout + 1
    endm
ENDASM


StartLoop  ' This loop repeats continuously just as a test.
   @ GetAddress _String1, _Addr        ' Get address of String
   gosub StringOut                     ' Send the String
   hserout [13,10]                     ' New Line

   @ GetAddress _AnotherString, _Addr  ' Get address of String
   gosub StringOut                     ' Send the String
   hserout [13,10]                     ' New Line
   pause 500
goto StartLoop                         ' Repeat


StringOut:  ' Send the string out via Hserout
    Readcode Addr, Char           ' Get a character
    if Char  = 0 then StringDone  ' Look for Null char, Stop if found
    hserout [Char]                ' Send char
    Addr = Addr + 1               ' Point to next character
    goto StringOut                ' Continue with rest of the string
  StringDone:
return


end

[mackrackit]

Is Wout defined as a VAR?
In the ASM part
_Wout

[BrianS]

It is used in C:\PBP\PBPPI18L.LIB but does not seem to be declared as a var in that file.

Is Wout defined as a VAR?
In the ASM part
_Wout

[Acetronics2]

Hi, Brian

Darrel's code compiles without any problem, either with MPLAB 8.56 or MCS
PBP is 2.60 a

soooo ... error is elsewhere ...

Alain

[BryanSw]

It compiles fine on my laptop too, and did compile on my work computer also. But not today. Now it is giving those stated errors and I'm trying to track down what is causing it. I am trying to figure out why "wout" is showing up as not defined on my work computer.

Brian

Hi, Brian

Darrel's code compiles without any problem, either with MPLAB 8.56 or MCS
PBP is 2.60 a

soooo ... error is elsewhere ...

Alain

[Bruce]

Wout doesn't get defined as a variable. It's an argument passed to the macro at the time the macro is invoked.

Example: @ GetAddress _String1, _Addr

The address of String1 gets passed to the macro as the Label argument. The address of your word variable Addr gets passed to the macro as the Wout argument.

You most likely have wout somewhere VS Wout and have case sensitivity turned ON in MPASM. Start MPASMWIN.EXE and uncheck the case sensitivity option.

The error from the library file is where the CHK?RP macro can't find Wout either.

Your code as posted above compiles fine here.