Quote Originally Posted by HenrikOlsson View Post
Hi,

You are looping around polling the RCIF flag 1000 times in one second (basically). But at 115200 baud you're sending ~11500 bytes or characters per second (one startbit, 8 databots, one stopbot = 10bits per character).

This means you're sending ~11.5 characters every millisecond. The PICs hardware buffer is only 2 levels deep so you're very likely to overrun the buffer before the HSERIN command is able to grab the data.

At 2400baud you're only sending 240 characters per second so your polling loop will have no problem catching the RCIF flag and jump to the Term_Rx routine before the buffer overruns.

Does that make sense?

/Henrik.
Yes, somewhat - no wonder why I was having problems missing the data... so is it better to reduce the baud rate for the port or reduce the for next loop steps ?