24v ac delay


Closed Thread
Results 1 to 8 of 8

Thread: 24v ac delay

Hybrid View

  1. #1
    Join Date
    Aug 2005
    Location
    Houston, TX
    Posts
    43


    Did you find this post helpful? Yes | No

    Default Re: 24v ac delay

    Correction, the relay I use is a G3VM-62C1. It costs $3.19, quite a bargin I think.

    And yes, it always delays a restart after the power goes out, but only after the power goes out. As long as to power is on, the relay stays latched. The thermostat will not restart faster than 4 - 5 minutes on its own, but it has no provision for delay after a power loss.

  2. #2
    Join Date
    Aug 2005
    Location
    Houston, TX
    Posts
    43


    Did you find this post helpful? Yes | No

    Default Re: 24v ac delay

    One more item re the generator. I want to know when it is running. A little Rf remote system seemed the way to go, but I had to sense when the unit was running. Since it is an emergency unit, I did not want to tap its electrical system, for fear a short would would mess it up, or might affect the warranty.

    My solution was to mount a reed switch near the alternator which controls power for a battery powered pic controlled transmitter. The receiver is in the house, mounted in a hollow book I got at a hobby store. It works great so far.
    Last edited by Archangel; - 23rd August 2011 at 04:20.

  3. #3
    Join Date
    Jan 2005
    Location
    Montreal, Quebec, Canada
    Posts
    3,161


    Did you find this post helpful? Yes | No

    Default Re: 24v ac delay

    Moved from Schematic.

    Robert

Members who have read this thread : 0

You do not have permission to view the list of names.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts