Im new to this forum so hello everyone! Sorry if this is posted in the wrong place.

I need a simple timer that will pulse for 2 seconds once in every (approx) 24 hours. Physical size must be small as it is to be fitted into existing equipment. Hence why I thought of a PIC solution. 5 volts available and it would need to trigger a miniture relay. Permanently connected to power so would need to reset and then wait a further 24 hours and send a pin high for 2 seconds again.

I know its a simple request but Ive had no luck in finding anything on the web, so if anyone could point me in the right direction that would be very much appreciated!

Chris