Need 4 modes with just 3 switches - need all modes to be selectable QUICKLY!

[HankMcSpank]

See if this works.

Bruce,

Many thanks for the example - you're a diamond.

Alas, it's not compiling on my PC - I'm certain that I've a parameter wrong somewhere or other on my machine, becuase after finishing posting last night such was my keeness, I spent another hour trying to get a very minimalist IOC test program to compile - & I was getting the same type of compilation errors.

The errors I'm seeing (both last night & now with your program) are as follows....

Error[128] [filepath]test_ioc.asm: Missing Arguments
Error[113] [filepath]test_ioc.asm: Symbol not previously defined (IntFlagReg)
Error[113] [filepath]test_ioc.asm: Symbol not previously defined (IntFlagBit)
Error[101] [filepath]test_ioc.asm: ERROR (Interupt Source (IntFlagReg, IntFlagBit) not found


If I remove the RABC_INT entry in in the interupt header & replace with INT_INT - it always compiles fine.

Any tips greatfully received, as I'm not getting off the ground with this IOC melarkey (& I'm chomping at the bit to breadboard the MKII 'no diodes' puppy!)

Many thanks once again.

Hank.

(PS I'm using V1.0 - the latest DTS-14.BAS)