Help with code in Assembly ! Something is Wrong

[Kamikaze47]

This may be more helpful to you. This is the same thing, but done using DT's instant interrupts. You also need to INCLUDE the DT_INTS and ReEnterPBP files relevant to your PIC.

ASM
INT_LIST macro ;    IntSource, Label,       Type, ResetFlag?
        INT_Handler TMR0_INT,  tmr0_handler, PBP,  yes
        INT_Handler INT_INT,   int_handler,  PBP,  yes
    endm
    INT_CREATE 
ENDASM

@ INT_ENABLE TMR0_INT
@ INT_ENABLE INT_INT

main:
' your main program
goto main

tmr0_handler:
oDimmer=1
@ INT_RETURN

int_handler:
TMR0=DimmerVal
oDimmer=0
@ INT_RETURN

[financecatalyst]

This may be more helpful to you. This is the same thing, but done using DT's instant interrupts. You also need to INCLUDE the DT_INTS and ReEnterPBP files relevant to your PIC.

ASM
INT_LIST macro ;    IntSource, Label,       Type, ResetFlag?
        INT_Handler TMR0_INT,  tmr0_handler, PBP,  yes
        INT_Handler INT_INT,   int_handler,  PBP,  yes
    endm
    INT_CREATE 
ENDASM

@ INT_ENABLE TMR0_INT
@ INT_ENABLE INT_INT

main:
' your main program
goto main

tmr0_handler:
oDimmer=1
@ INT_RETURN

int_handler:
TMR0=DimmerVal
oDimmer=0
@ INT_RETURN

I am still trying to understand the above code -
Is this code running timer0 interrupt all the time?
I learnt that in DIMMERS, you have to control the +ve half of the cycle only, so timer0 should be loaded after checking the positive half making the PIC pin HIGH and keeping the triac ON for that period.

ALSO FOR THE ASM PART:

        btfsc   INTCON, INTF                    ; If INTF=1 THEN GOTO ZeroCrossingInt (1)
        goto    ZeroCrossingInt                 ;        (2)
        btfss   INTCON, T0IF                    ; If T0IF=0 THEN GOTO EndInt                (3)
        goto    EndInt                              ;                                                           (4)
T0Overflow                                      ; T0Overflow: (5)
        bcf     INTCON, T0IF                    ; T0IF=0  (6)
        bsf     _oDimmer                        ; oDimmer=1 (7)
        goto    EndInt                          ; GOTO EndInt (8)

ZeroCrossingInt                                 ; ZeroCrossingInt: (9)
        bcf     INTCON, INTF                    ; INTF=0 (10)
        movf    _DimmerVal,w                    ; TMR0=DimmerVal(11)
        movwf   TMR0                             ;(12)
        bcf     _oDimmer                        ; oDimmer=0(13)

I believe everytime this interrupt will be entered: (Please correct me where I go wrong)
--- Statement (1) in the code will always be true (this is the reason why interrupt has happened), so the code will jump to (9), it will act on (10) & then (11) & (12) -- SO WHERE DOES IT WAIT FOR TIMER0 TO RUN OUT & WHY STATEMENT (13) IS THERE CLEARING _oDimmer when this bit is not set in the sequence I just understood and explained above.

--- When does code enters (5) ? Does after (13) code goes to (3)?

[Kamikaze47]

Statement (1) will not always be true. The interrupt routine services all interrupts. Statements (1)-(4) are just checking which interrupt flag is set (which interrupt went off). If it was the INT interrupt then it jumps to the ZeroCrossingInt section. If it was the TMR0 interrupt then it continues on to the T0Overflow section.

I don't know what else is happening in your program, so I can only tell you what that interrupt routine is doing which is this:

When timer0 overflows: set oDimmer to 1.

When external interrupt (INT) occurs: set timer0 value to "DimmerVal" and set oDimmer to 0.

[financecatalyst]

Statement (1) will not always be true. The interrupt routine services all interrupts. Statements (1)-(4) are just checking which interrupt flag is set (which interrupt went off). If it was the INT interrupt then it jumps to the ZeroCrossingInt section. If it was the TMR0 interrupt then it continues on to the T0Overflow section.

I don't know what else is happening in your program, so I can only tell you what that interrupt routine is doing which is this:

When timer0 overflows: set oDimmer to 1.

When external interrupt (INT) occurs: set timer0 value to "DimmerVal" and set oDimmer to 0.

Is it possible to PM you?

[Kamikaze47]

If you like, but if its a question that you think others may benefit from the answer too, then you may as well ask in the thread.