PICBASIC Pro examples will not compile????

[ScaleRobotics]

Right out of the MicroCode Studio Help:


FOR B0 = 0 TO 5 ' Count from 0 to 5
LOOKUP B0,["Hello!"],B1 ' Get character number B0 from string to variable B1
SEROUT 0,N2400,[B1] ' Send character in B1 to Pin0 serially
NEXT B0 ' Do next character

You have to define your variables B0 and B1. Or you can add this include to your program. See page 24 ish of the manual.

Include "bs2defs.BAS"

FOR B0 = 0 TO 5 ' Count from 0 to 5
LOOKUP B0,["Hello!"],B1 ' Get character number B0 from string to variable B1
SEROUT 0,N2400,[B1] ' Send character in B1 to Pin0 serially
NEXT B0 ' Do next character

[N6VMO_]

You have to define your variables B0 and B1. Or you can add this include to your program. See page 24 ish of the manual.

Include "bs2defs.BAS"

FOR B0 = 0 TO 5 ' Count from 0 to 5
LOOKUP B0,["Hello!"],B1 ' Get character number B0 from string to variable B1
SEROUT 0,N2400,[B1] ' Send character in B1 to Pin0 serially
NEXT B0 ' Do next character

OK, I will give it a try...and read a bit more too.

Thank you!

John