help with PIC16F628 conditional program

[Acetronics2]

Could you post your ISIS file here ??? ( xxx.DSN )

Alain

[joseph]

here
direct link:
http://dc187.2shared.com/download/D7...42736-ef003566

if the direct link doesn't work, here:
http://www.2shared.com/file/D7VAeRiX/ecu.html


thanks

[Acetronics2]

Hi, Joseph

Definitly a simulator issue ... ( one MORE for Proteus ... )

Just run your program in MPSIM ( MPLAB Simulator ) in step by step mode, and you won't see any change for the output ...

I did told you Sims are toys ... , forget about them !!!

BTW, Correct code is:

 IF ( FWD ^^ REVS ) AND NOT NEUT THEN   
        forward = FWD : revers = NOT forward
       ELSE
        forward = 0 : revers = 0
       ENDIF

Doesn't change anything ... but brain satisfying !!! ( it's a logical EXOR, and not a bitwise one )

Alain

[Darrel Taylor]

Joseph,

Add some resistors in series with the LED's that are being overdriven.
It will stop blinking.

Proteus Rules.
MPSIM is Lame.

[Acetronics2]

Joseph,

Add some resistors in series with the LED's that are being overdriven.
It will stop blinking.

Proteus Rules.
MPSIM is Lame.

Hi, Darrel ...

did you try to close Forward, then the two other switches ( or/and ) ...

you said " lame " ??? ... funny ...

Alain

Judge of peace: my EasyPic5 ... Proteus is OUT !!!

[joseph]

Joseph,

Add some resistors in series with the LED's that are being overdriven.
It will stop blinking.

Proteus Rules.
MPSIM is Lame.

whoa it seems that proteus simulates the overload protection, it worked

thanks Darrel, thanks Alain

i will try to complete the code. i'l update this thread soon