I have a 16F88 program which works well and uses Hserin and the following define and snipet of relevant code.

Code:
DEFINE HSER_BAUD 9600		'Set Baud rate to 9600bps
DEFINE HSER_BITS 9		'Set to 9 bit mode
DEFINE HSER_EVEN 1		'Set Even Parity
DEFINE HSER_CLROERR 1 		'Clear overflow error automatically

HSERIN [WAIT($87), STR BCMDATA\11]	'Wait for packet start $87 then Rxd 11 bytes into BCMDATA
Now I want to transfer this program to a 12F683 chip so need to use Serin2, but although i can see what i believe the basic line should look like (below), the mode number is confusing. What mode or defines are equivalent to what I have with hserin above?

The data is 8 bit with an even parity bit.

Code:
SERIN2 Bcm, ???, [WAIT($87), STR BCMDATA\11]