Quote Originally Posted by Bruce View Post
RX LO is just the local oscillator frequency fed into the mixer on a superhet receiver. When you change the TX frequency, it also has to change the receive frequency.
As a novice I would still like to ask, TX frequency channel is changed by sending a serial command to the TX module, I got that loud and clear, how is RX channel selected, is it by sending excatly the same command to the RX module? & rest is taken care by the module itself?
I am very confused because on TX datasheet it says clearly that what to send and what will be the TX frequency, BUT on RX datasheet it doesn't say what to send and what will be the RX centre frequency, instead it mentions excatly the same thing as in the TX datasheet, which I think is only for changing TX channel. It may be a small thing to undertstand but I am still not getting it clearly.

Also - the HP3 series serial communications will not work with DEBUG or any other asynchronous (means no clock) since it is synchronous (means it requires clock & data) serial.

Check out http://linxtechnologies.com/Documents/AN-00155.pdf for a code example of serial communications with an HP3 series.
I checked the link for the example code with serial communication but it is in assembly language which unfortunately I can't understand
Is there any other link somewhere showing same or similar code in PBP, PLEASE point me to it?