Making Array of two ports

[Acetronics2]

May be help on the thread " Word arrays and EEPROM"

Alain

[mister_e]

3 things:

1. your Array size must be 10 instead of 9
2. for to next loop=o or loop=0 ?
3. you didn't set your TRIS register. TRISC=0 : TRISA=0

BUT i don't know if you can address i/o in array...

[Darrel Taylor]

Hi John,

There's no way to do that with standard PBP commands. Normal PBP arrays must be completely contiguous. However, we can create a new command with a little assembly language.

This isn't exactly what you were looking for, but it does accomplish the exact same thing.

Put this code near the top of your program.

'------[ PortOut macro ]----------------
Temp_idx    VAR  byte
Temp_State  VAR  BIT

ASM
PortOut  macro idx, state
    MOVE?BB idx, _Temp_idx
    MOVE?CT state, _Temp_State
EndASM
    if Temp_idx < 5 then
        PORTA.0[Temp_idx] = Temp_State
    else
        Temp_idx = Temp_idx - 5
        PORTC.0[Temp_idx] = Temp_State
    endif
@   endm
'---------------------------------------

Then you can simply do this...

for x = 0 to 9
@   PortOut  _X, 1  
next x

With this code, the state("1" in this case) must be a constant. I did it that way just to be consistant with your request.

If you wanted to use a variable instead, simply change this line in the PortOut routine...

MOVE?CT state, _Temp_State

-- changed to --

MOVE?TT state, _Temp_State

HTH,
   Darrel