Electric Noise PIC problem

Results 1 to 12 of 12

Threaded View

  1. - 1st June 2010, 11:50 #2
    Dave's Avatar
    Dave
    Dave is offline Prolific Poster
    Join Date
    Mar 2003
    Location
    Commerce Michigan USA
    Posts
    1,166

    Did you find this post helpful? Yes | No

    Default

    Tobias , Where is the pullup reststor for the WOT input to the pic? The component you are using is indeed an opto but the output acts the same as an open collector transistor to ground. That is not a good design as the fets when shut off do not set a state to the pic input pin. Also have you checked the actual switch that sets the WOT state during the maximum engine output? Maybe the "vibration" is falsely triggering the pic.. Also, What is the purpose of R22?

    Dave Purola,
    N8NTA
    Last edited by Dave; - 1st June 2010 at 11:52. Reason: Another Question
« Previous Thread | Next Thread »

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules