A polemic pamphlet

Closed Thread
Results 1 to 14 of 14
  1. - 21st May 2010, 16:08 #1
    IAmTheAnswer's Avatar
    IAmTheAnswer
    IAmTheAnswer is offline Junior Member
    Join Date
    May 2010
    Posts
    26

    Default A polemic pamphlet

    A lot of times I see people create devices which are already there. An inverter to have 230 volts out of 10 volts for example.

    Others create the thousandth clock.

    Key Word "Reinventing the wheel".

    I see that some people do this to learn. I understand that when it comes to letting a LED blink. But an inverter is way too advanced to be used as a learning device aka dust-catcher.

    I have always built something I could actually use. If it was a blinking led, then it was coupled with another timer and a switch to have at least a tea-timer.

    Why would anyone want to reinvent the wheel? Out of ignorance?
    Last edited by IAmTheAnswer; - 21st May 2010 at 16:15.
  2. - 21st May 2010, 16:16 #2
    Acetronics2's Avatar
    Acetronics2
    Acetronics2 is offline Fanatical Contributor
    Join Date
    May 2004
    Location
    NW France
    Posts
    3,651

    Did you find this post helpful? Yes | No

    Post

    Quote Originally Posted by IAmTheAnswer View Post

    Why would anyone want to reinvent the wheel? Out of ignorance?
    Hi,

    I'm surprised such a high level guy didn't think to this so simple answer :

    just to see how the wheel works ... and may be also what to do with a couple or two of wheels ...

    Just a Warning from the moderator :

    DO NOT cross the yellow line ... or push someone to the other side.

    Alain
    ************************************************** ***********************
    Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
    ************************************************** ***********************
    IF there is the word "Problem" in your question ...
    certainly the answer is " RTFM " or " RTFDataSheet " !!!
    *****************************************
  3. - 21st May 2010, 16:35 #3
    ScaleRobotics's Avatar
    ScaleRobotics
    ScaleRobotics is offline Prolific Poster
    Join Date
    Feb 2006
    Location
    Gilroy, CA
    Posts
    1,530

    Did you find this post helpful? Yes | No

    Default

    Quote Originally Posted by IAmTheAnswer View Post
    Why would anyone want to reinvent the wheel? Out of ignorance?
    More likely they have a sincere will to learn. The people that "reinvent the wheel" as you say, are more concerned with increasing their knowledge and doing their own work, rather than worrying how advanced their project is, or if it has ever been done before.
    Last edited by ScaleRobotics; - 21st May 2010 at 16:41.
  4. - 21st May 2010, 23:04 #4
    Darrel Taylor's Avatar
    Darrel Taylor
    Darrel Taylor is offline Fanatical Contributor
    Join Date
    Jul 2003
    Location
    Colorado Springs
    Posts
    4,959

    Did you find this post helpful? Yes | No

    Default

    If nobody was re-inventing wheels ... your car would be riding on these ...

    Name: stone-wheel-thumb5121882.jpg Views: 372 Size: 40.2 KB
    Of course, there probably wouldn't be any cars.

    That's how new (and better) things get discovered.


    .
    Last edited by Darrel Taylor; - 21st May 2010 at 23:15. Reason: better
    DT
  5. - 22nd May 2010, 00:06 #5
    Bruce's Avatar
    Bruce
    Bruce is offline Prolific Poster
    Join Date
    Jul 2003
    Posts
    2,405

    Did you find this post helpful? Yes | No

    Default

    Key Word "Build a better mousetrap"....
    Regards,

    -Bruce
    tech at rentron.com
    http://www.rentron.com
  6. - 22nd May 2010, 07:40 #6
    IAmTheAnswer's Avatar
    IAmTheAnswer
    IAmTheAnswer is offline Junior Member
    Join Date
    May 2010
    Posts
    26

    Did you find this post helpful? Yes | No

    Exclamation

    Quote Originally Posted by Darrel Taylor View Post
    If nobody was re-inventing wheels ... your car would be riding on these ...
    Wrong. If people stopped re-inventing wheels( which is being meant figurative, stupid ) modern wheels would be much more advanced. Understanding how wheels work is necessary to create better ones. But there is no use in recreating the exact same wheel again. Those people don't have a goal in mind or too much free time.

    There are so many people on this planet. We'd have much more variety in anything if people did not spend so much time copying each other.
  7. - 22nd May 2010, 10:52 #7
    vaporized's Avatar
    vaporized
    vaporized is offline Junior Member
    Join Date
    Sep 2009
    Posts
    19

    Did you find this post helpful? Yes | No

    Default

    ...which is being meant figurative, stupid...
    Well, you obviously feel surrounded by dullards here, but no worries - just keep that attitude. In no time you'll end up having your own forum comprising but a one fool... You like mirror, don't you?
  8. - 22nd May 2010, 11:15 #8
    IAmTheAnswer's Avatar
    IAmTheAnswer
    IAmTheAnswer is offline Junior Member
    Join Date
    May 2010
    Posts
    26

    Did you find this post helpful? Yes | No

    Default

    Quote Originally Posted by grinder View Post
    Well, you obviously feel surrounded by dullards here,
    That's your problem.
  9. - 22nd May 2010, 12:55 #9
    Acetronics2's Avatar
    Acetronics2
    Acetronics2 is offline Fanatical Contributor
    Join Date
    May 2004
    Location
    NW France
    Posts
    3,651

    Did you find this post helpful? Yes | No

    Default

    Thread moved for reason :

    OBVIOUSLY NO LINK AT ALL TO PICBASIC

    OFF TOPIC is the only convenient place.

    Alain
    ************************************************** ***********************
    Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
    ************************************************** ***********************
    IF there is the word "Problem" in your question ...
    certainly the answer is " RTFM " or " RTFDataSheet " !!!
    *****************************************
  10. - 22nd May 2010, 15:59 #10
    IAmTheAnswer's Avatar
    IAmTheAnswer
    IAmTheAnswer is offline Junior Member
    Join Date
    May 2010
    Posts
    26

    Did you find this post helpful? Yes | No

    Default

    There is always a link to pbp. But offtopic is a more convenient place for this pamphlet.

    I am the answer
  11. - 22nd May 2010, 16:01 #11
    IAmTheAnswer's Avatar
    IAmTheAnswer
    IAmTheAnswer is offline Junior Member
    Join Date
    May 2010
    Posts
    26

    Did you find this post helpful? Yes | No

    Default

    Come on, this is a polemic pamphlet. Disagree or agree more. State your experiences. Why would you want to reinvent the wheel instead of using the knowledge(idiomatically spoken)?
  12. - 23rd May 2010, 14:04 #12
    sayzer's Avatar
    sayzer
    sayzer is offline SuperMod
    Join Date
    Jan 2006
    Location
    Istanbul
    Posts
    1,185

    Did you find this post helpful? Yes | No

    Default keep re-inventing the wheels !

    Quote Originally Posted by IAmTheAnswer View Post
    Wrong. If people stopped re-inventing wheels( which is being meant figurative, stupid ) modern wheels would be much more advanced. Understanding how wheels work is necessary to create better ones. But there is no use in recreating the exact same wheel again. ...


    "Wrong". If nobody was re-inventing wheels, we wouldn't have air planes today, and even more space crafts.

    BTW: This "IAmTheAnswer" guy is reminding me the guy named "Tjackson", if spelled correct.

    ----------------------------
    "If the Earth were a single state, Istanbul would be its capital." Napoleon Bonaparte
  13. - 23rd May 2010, 14:13 #13
    Acetronics2's Avatar
    Acetronics2
    Acetronics2 is offline Fanatical Contributor
    Join Date
    May 2004
    Location
    NW France
    Posts
    3,651

    Did you find this post helpful? Yes | No

    Default

    Quote Originally Posted by sayzer View Post
    BTW: This "IAmTheAnswer" guy is reminding me the guy named "Tjackson", if spelled correct.
    Hi, Sayzer

    A German guy, with such a speech ...

    do you remember someone named " SelbstDual " ... about two years ago.

    Alain
    ************************************************** ***********************
    Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
    ************************************************** ***********************
    IF there is the word "Problem" in your question ...
    certainly the answer is " RTFM " or " RTFDataSheet " !!!
    *****************************************
  14. - 23rd May 2010, 23:04 #14
    rsocor01's Avatar
    rsocor01
    rsocor01 is offline Contributor
    Join Date
    Jan 2009
    Location
    Miami, Florida USA
    Posts
    699

    Did you find this post helpful? Yes | No

    Default

    Quote Originally Posted by sayzer View Post
    BTW: This "IAmTheAnswer" guy is reminding me the guy named "Tjackson", if spelled correct.
    Hmmm, I was thinking just that.

    Robert
« Previous Thread | Next Thread »

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules