Pic16f690 and LCD

Closed Thread
Results 1 to 5 of 5

Hybrid View

  1. - 18th May 2010, 00:41 #1
    Darrel Taylor's Avatar
    Darrel Taylor
    Darrel Taylor is offline Fanatical Contributor
    Join Date
    Jul 2003
    Location
    Colorado Springs
    Posts
    4,959

    Did you find this post helpful? Yes | No

    Default

    Try removing the line ...
    HIGH PORTB.6

    B.6 is the Enable Line which is handled by the LCDOUT command.
    You don't need to set it HIGH to enable the LCD.
    DT
  2. - 18th May 2010, 00:47 #2
    ross246's Avatar
    ross246
    ross246 is offline Junior Member
    Join Date
    May 2010
    Posts
    20

    Did you find this post helpful? Yes | No

    Default

    Working perfectly now on a new lcd, not sure whether it was removing the HIGH Portb.6 or the new lcd thanks anyways though. I really appreciate it.
« Previous Thread | Next Thread »

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules