StickOS

[Bruce]

I ran this set of Gerbers through the batchpcb DRC and it passed. Looks like they have 8mil limits on spacing for less than 4 layer boards.

Sorry. Forgot to include the DipTrace file.

[dhouston]

I ran this set of Gerbers through the batchpcb DRC and it passed. Looks like they have 8mil limits on spacing for less than 4 layer boards.

Bruce,

I have not followed the thread so am not completely clear on the exact size, minimum trace/space and quantity desired but I got a $96 (includes shipping) online quote from ezPCB for 30 pcs 3.100 x 1.475 with 4 mil trace/space and 8 day delivery. I've used them and they do excellent work.

• http://ezpcb.com/

[cncmachineguy]

After reading a little more about this, Put me down for sure. I have no problem with 4 or 5. As I think about this, I may even have some uses in mind. Thanks to all who have put so much work into this!!

[Ioannis]

OK, I am still in.

What size parts wll be used?

I am getting old I guess and my eyes do not focus very close

Ioannis

[ScaleRobotics]

OK, I am still in.

What size parts wll be used?

I am getting old I guess and my eyes do not focus very close

Ioannis

Yeah, I am having the same trouble. Might have to up my reading glasses magnification.....

But the toaster makes it a lot easier. We are back to a 64 pin PIC32MX440F512H, if that makes it any better.

Also looks like dhouston found a cheaper source for the boards, so once I get a single running, I'll try them out for a larger order.

[Ioannis]

Does this head mounted gadget give a good stereoscopic view?

Ioannis

[rmteo]

Does this head mounted gadget give a good stereoscopic view?

Ioannis

I use a similar magnifier when working with SMD's (components to 0402 and pin pitch to 0.65mm). They do give good depth perception - if that is what you mean by stereoscopic view.