StickOS

[ScaleRobotics]

Did the quote look reasonable?

I tried uploading Bruce's newest layout to batchpcb, but still got some "errors" on clearance (allowable clearance for batchpcb). I am not familiar enough with Dip Trace to make the batchpcb required changes to Bruce's board. I had planned on getting one board made through batchpcb, before getting a larger quote.

So at this point, it seems best for me to get the slightly smaller UBW32 board made.

I have a quote from http:www.pcb-pool.com for 30 of the UBW32 boards for $6.50 each. I think this is very reasonable. If there is still enough interest from people wanting to populate their own boards, let me know, and I will start the order. Otherwise it is almost double the cost in singles from batchpcb, plus (I think plus) a $10 fee. So a larger order, is definitely the way to go for costs.

Let me know what you guys think of the UBW32 v. 2.6 circuit board for $6.50 plus shipping. UBW32 Site

You might notice that the v.2.6 board can be populated with two different chips. From the UBW32 website:
Created two board versions, one called MX460 and one called MX795: Only difference is silk screen of board name, otherwise they are identical. But I don't think StickOS is available yet for MX795.

Walter