StickOS

[rmteo]

Did the quote look reasonable?

[ScaleRobotics]

Did the quote look reasonable?

I tried uploading Bruce's newest layout to batchpcb, but still got some "errors" on clearance (allowable clearance for batchpcb). I am not familiar enough with Dip Trace to make the batchpcb required changes to Bruce's board. I had planned on getting one board made through batchpcb, before getting a larger quote.

So at this point, it seems best for me to get the slightly smaller UBW32 board made.

I have a quote from http:www.pcb-pool.com for 30 of the UBW32 boards for $6.50 each. I think this is very reasonable. If there is still enough interest from people wanting to populate their own boards, let me know, and I will start the order. Otherwise it is almost double the cost in singles from batchpcb, plus (I think plus) a $10 fee. So a larger order, is definitely the way to go for costs.

Let me know what you guys think of the UBW32 v. 2.6 circuit board for $6.50 plus shipping. UBW32 Site

You might notice that the v.2.6 board can be populated with two different chips. From the UBW32 website:
Created two board versions, one called MX460 and one called MX795: Only difference is silk screen of board name, otherwise they are identical. But I don't think StickOS is available yet for MX795.

Walter

[Bruce]

I ran this set of Gerbers through the batchpcb DRC and it passed. Looks like they have 8mil limits on spacing for less than 4 layer boards.

Sorry. Forgot to include the DipTrace file.

[dhouston]

I ran this set of Gerbers through the batchpcb DRC and it passed. Looks like they have 8mil limits on spacing for less than 4 layer boards.

Bruce,

I have not followed the thread so am not completely clear on the exact size, minimum trace/space and quantity desired but I got a $96 (includes shipping) online quote from ezPCB for 30 pcs 3.100 x 1.475 with 4 mil trace/space and 8 day delivery. I've used them and they do excellent work.

• http://ezpcb.com/

[cncmachineguy]

After reading a little more about this, Put me down for sure. I have no problem with 4 or 5. As I think about this, I may even have some uses in mind. Thanks to all who have put so much work into this!!

[Ioannis]

OK, I am still in.

What size parts wll be used?

I am getting old I guess and my eyes do not focus very close

Ioannis

[ScaleRobotics]

OK, I am still in.

What size parts wll be used?

I am getting old I guess and my eyes do not focus very close

Ioannis

Yeah, I am having the same trouble. Might have to up my reading glasses magnification.....

But the toaster makes it a lot easier. We are back to a 64 pin PIC32MX440F512H, if that makes it any better.

Also looks like dhouston found a cheaper source for the boards, so once I get a single running, I'll try them out for a larger order.

[rtestardi]

> But I don't think StickOS is available yet for MX795.

It is now. :-)

-- Rich