StickOS


Results 1 to 40 of 104

Thread: StickOS

Threaded View

  1. #11
    Join Date
    Jul 2003
    Posts
    2,405


    Did you find this post helpful? Yes | No

    Default

    Thanks Walter. I'm guessing they have the internal Vreg disable, so I changed it.

    This is the final version unless someone notices something wrong. It has a lot of spacing changes, copper pour islands removed, and has passed DRC.

    I'm attaching the BOM, Gerber files, and the final CAD file so anyone can get quotes on boards & component prices if they like, or modify the original design as needed.

    I have a bunch of parts on-hand like resistors, caps, /MCLR diode, etc, and some female headers if people want to use them for the analog pins - so it will save everyone a few bucks. See the notes in the BOM for whatever I have a ton of in stock already.

    For a few parts I've included part #s for Mouser & DigiKey, but everyone's welcome to lookup cheaper parts if they can find them.

    Ioannis,

    Thanks, but my pick & place machine is a pair of SMD tweezers.. That's why I didn't want to go with any parts smaller than 0805 since I'll be placing them all by hand.

    As for the through-hole parts, I don't mind installing the 2 switches, but the headers I'm going to leave to everyone else to install themselves.

    Note: A few manufacturers from China have contacted me asking to quote on PCBs and full assembly of these, so I have attached pretty much all files they'll need to do so. You can contact me directly if you're interested.
    Attached Images Attached Images  
    Attached Files Attached Files
    Regards,

    -Bruce
    tech at rentron.com
    http://www.rentron.com

Members who have read this thread : 1

You do not have permission to view the list of names.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts