Sony IR Remote

[Ioannis]

Even better if you can afford the Logic from www.saleae.com to analyse digital signals. It saved me many times when trying to copy signals from similar cases.

Ioannis

[fratello]

I spend time with this "killer" code. Now I discover another strange phenomenon : anything I do, can't generate "train" of pulse.
Instead generating for 4 times this sequence : high 2650 ,pause 2500, high 660, pause 100
I have just ONE sequence for about 42.25 mS !!!
WHY ?!?

main:

zecime  CON 106    '// = ( 106 * 25uS) = 2650 uS burst
unu       CON 24     '// = (24 * 25uS) = 0.60 mS burst
delay     CON 104


i 		var byte
cycles	var byte
acycles      var byte

;============================
Main:
IF but1=0 then 			; VOLUME UP
    goto ir_send
endif

Goto Main

'=========================================
ir_send:
     	cycles=zecime
        acycles=unu
 for i=1 to 4        
        call Pulse
        pauseus  delay        
        call Pulser
 next i     
Pauseus 100   
Goto main        ' or Return, have no result !

Pulse:              ' Generate "Cycles" number of 40kHz pulses
ASM
   bsf gpio, 2     ; 1uS, LED=on
   goto $+1         ; + 2uS = 3uS
   goto $+1         ; + 2uS = 5uS
   goto $+1         ; + 2uS = 7uS
   goto $+1         ; + 2uS = 9uS
   goto $+1         ; + 2uS = 11uS
   goto $+1         ; + 2uS = 13uS   
   bcf gpio, 2     ; 1uS, LED=off
   goto $+1         ; + 2uS = 3uS
   goto $+1         ; + 2uS = 5uS
   goto $+1         ; + 2uS = 7uS
   goto $+1         ; + 2uS = 9uS
   decfsz _Cycles,f ; + 1uS = 10S    
   goto _Pulse      ; + 2uS = 12uS
   return           ; Add 2uS for return to caller    
ENDASM


Pulser:              ' Generate "Cycles" number of 40kHz pulses
ASM
   bsf gpio, 2     ; 1uS, LED=on
   goto $+1         ; + 2uS = 3uS
   goto $+1         ; + 2uS = 5uS
   goto $+1         ; + 2uS = 7uS
   goto $+1         ; + 2uS = 9uS
   goto $+1         ; + 2uS = 11uS
   goto $+1         ; + 2uS = 13uS   
   bcf gpio, 2     ; 1uS, LED=off
   goto $+1         ; + 2uS = 3uS
   goto $+1         ; + 2uS = 5uS
   goto $+1         ; + 2uS = 7uS
   goto $+1         ; + 2uS = 9uS
   decfsz _Acycles,f ; + 1uS = 10S    
   goto _Pulser      ; + 2uS = 12uS
   return           ; Add 2uS for return to caller    
ENDASM

Thanks again for attention !

[fratello]

On first row: original Blaupunkt remote, volume up command.
On second row : my remote, volume up command.
Using same sensor (original Blaupunkt).
Original-work; my-NO !!! I'm stuck, dissapointed, sad...

[ardhuru]

Could you attach the 2 wav/mp3 files? I'll open them in a sound editor at my end; couldnt quite see the whole pulse train.

If this forum doesnt permit audio attachments, you could mail them to me at ardhuru_at_gmail.com.

Also, some remotes send the same frame twice; does your Blaupunkt need that?

Regards,

Anand.

[fratello]

I try different variant of PBP code; no result.
I find the example of Mr.Bruce :

  ' IR carrier generator routines. Freq.inc.

  Cycles VAR BYTE    ' Number of carrier cycles
  
  GOTO OverFreq  ' jump over pulse routines
  
' Generate "Cycles" number of 40kHz pulses
ASM
_Pulse40
   bcf IRTX,PIN     ; 1uS, LED=on
   goto $+1         ; + 2uS = 3uS
   goto $+1         ; + 2uS = 5uS
   goto $+1         ; + 2uS = 7uS
   goto $+1         ; + 2uS = 9uS
   goto $+1         ; + 2uS = 11uS
   goto $+1         ; + 2uS = 13uS   
   bsf IRTX,PIN     ; 1uS, LED=on
   goto $+1         ; + 2uS = 3uS
   goto $+1         ; + 2uS = 5uS
   goto $+1         ; + 2uS = 7uS
   goto $+1         ; + 2uS = 9uS
   decfsz _Cycles,f ; + 1uS = 10S    
   goto _Pulse40    ; + 2uS = 12uS
   return           ; Return to caller    
ENDASM

' Generate "Cycles" number of ~38.4kHz pulses
ASM
_Pulse38
   bcf IRTX,PIN     ; 1uS, LED=on
   goto $+1         ; + 2uS = 3uS
   goto $+1         ; + 2uS = 5uS
   goto $+1         ; + 2uS = 7uS
   goto $+1         ; + 2uS = 9uS
   goto $+1         ; + 2uS = 11uS
   goto $+1         ; + 2uS = 13uS   
   bsf IRTX,PIN     ; 1uS, LED=on
   goto $+1         ; + 2uS = 3uS
   goto $+1         ; + 2uS = 5uS
   goto $+1         ; + 2uS = 7uS
   goto $+1         ; + 2uS = 9uS
   nop              ; + 1uS = 10uS
   decfsz _Cycles,f ; + 1uS = 11S    
   goto _Pulse38    ; + 2uS = 13uS
   return           ; Return to caller    
ENDASM

OverFreq:

so I write my program, for the hardware like in schematic ( for now I test just Volume Up) :

@ DEVICE PIC12F675, intrc_osc, wdt_off, pwrt_off, mclr_off, bod_off

DEFINE OSC  4
DEFINE OSCCAL_1K 1          ' Set OSCCAL for 1k -HELPS tuning the crystal for more accurate timing

@ #define IRTX GPIO  ; Define port to use for IR out
@ #define PIN 1      ; Define port pin to use for IR out

INCLUDE "Freq.inc" ' 
but  var gpio.5

GPIO.5=1
TRISIO.5=1
GPIO.1 = 1       ' IR LED off   -----|<|----/\/\/\----+5
TRISIO.1 = 0     ' Output for IR signal
WPU     = %00111101
  CMCON = 7        ' Comparators disabled
  ANSEL = 0        ' A/D disabled


Loops VAR BYTE

       
Main:

if but=0 then
        
        FOR Loops = 1 TO 10 
          Cycles = 102      ' 102 * 26 = 2652 uS
          CALL Pulse38
          
          Pauseus 2580      ' accurate pause of 2580 uS ?!?
          
          Cycles = 25       ' 25 * 26 = 650 uS ; maybe must EXACTLY 660 uS - how ?!?
          CALL Pulse38

          pauseus 50000
          pauseus 50000
         Next loops
endif          
GOTO Main
  
  END

but, OF COURSE ?!?, no results. Somebody, just one little help ? Please...

[Ioannis]

Are you sure your IR LED lights? I mean of course you cannot see it. But with camera or your mobil phone maybe you can see if the LED is lighting.

Do not trust this very much, since my SONY DSC-W17 does not see any IR at all! So test this first with a known IR transmitter to be sure.

Ioannis

[fratello]

I test the function of my schematic with two phones camera (Nokia & S-E) ; and with InfraX soft too. I capture the signal with TSOP 1738 on serial port, for "original" remote and for "PIC" remote...Works fine...but without results on my RC ! Thanks for support !