The Screamer bootloader and LCDout

[Bruce]

PBP always inserts a goto INIT at location 0. Normally this is all PBP will
insert from locations 0 - 3 if you use DEFINE LOADER_USED 1 to force the ORG 4.

Here's an example of what happens with DEFINE LOADER_USED 1

ORG 0 ; Reset vector at 0
goto INIT ; Finish initialization <-- a PBP thing for initialization
ORG 4 ; Make sure no library code in first 4 loc

When you use the LCDOUT command with PBP, it inserts clrf FLAGS before goto INIT.

Here's what it looks like.

ORG 0 ; Reset vector at 0
clrf FLAGS ; Clear all flags on reset
goto INIT ; Finish initialization
ORG 4 ; Make sure no library code in first 4 loc

FLAGS is a system variable used by PBP, and it only gets inserted before goto INIT when using the LCDOUT command.

Here's what you can do to fix it to work with the Bloader software.

Open the PBPPIC14.LIB file and look for this section. Comment out clrf FLAGS as shown below. Save the library file.

;******************************************
;* Startup Code                                                     *
;*                                                                        *
;* Input      : None                                                 *
;* Output     : None                                                *
;*                                                                        *
;* Notes      : Must be first library routine.                  *
;******************************************

; <<other stuff snipped out here>>

  LIST
    ORG 0                       ; Reset vector at 0
  NOLIST
    ifdef ICD_USED
  LIST
        nop                     ; Skip first location for ICD
  NOLIST
    endif

    ifdef FLAGS_USED
  LIST
    ;    clrf    FLAGS           ; Clear all flags on reset <----- COMMENT OUT
  NOLIST
    endif

If you use the LCDOUT command then clear FLAGS in the begining of your PBP code. This instruction should be the first code executed.

FLAGS=0

That's it. The clrf FLAGS will not be automatically inserted at location 0, and your PBP programs will work with the Bloader software as-is.

[ice]

Thanks alot Bruce,
your reply for explantory,ill try tht tday

BTW,i reloaded the microchip Bootloader V9 and all my PBP programs work well with it including LCDOUT
i was working on the V2 of the loader.

Thank you once again.
-ice

[bartleph]

Hi,
I wonder if anyone can help please:-
I'm trying to use the PicLoader Bootloader. I have PICBASIC PRO Ver 2.30.
How do I stop my Program from writing over the BootLoader vector...I've seen Bruce's reply further up where he says to modify the PBPPIC14.LIB file to stop the LCD clrf Flags from causing a problem, and I've done that. Should I be using DEFINE ONINT_USED 1 or
DEFINE LOADER_USED 1 with this version of PicBasic Pro?

Any help appreciated....Thanks Paul

[Bruce]

Hi,
I wonder if anyone can help please:-
I'm trying to use the PicLoader Bootloader. I have PICBASIC PRO Ver 2.30.
How do I stop my Program from writing over the BootLoader vector...I've seen Bruce's reply further up where he says to modify the PBPPIC14.LIB file to stop the LCD clrf Flags from causing a problem, and I've done that. Should I be using DEFINE ONINT_USED 1 or
DEFINE LOADER_USED 1 with this version of PicBasic Pro?

Any help appreciated....Thanks Paul

Yes. DEFINE ONINT_USED 1 was used for PBP versions prior to 2.33. Later versions use DEFINE LOADER_USED 1.