EasPic6 3.3 volts?

[ScaleRobotics]

Walter,

Have a look at the EasyPIC6 manual (http://www.mikroe.com/pdf/easypic6/e...anual_v100.pdf) - page11 shows the schematic for the power supply, which appears single rail 5v

From the Mikroelectronica forum http://www.mikroe.com/forum/viewtopi...121318#p121318

Thanks Malc. All those jumpers, but none for 3.3 volts? I guess I was hopeful. I have an EasyPic6 coming in the mail, but it looks like I will have to breadboard the 3 volt varieties.

Thanks,

Walter