Problems starting an 18F8720

Closed Thread
Results 1 to 9 of 9

Hybrid View

  1. - 19th April 2010, 15:46 #1
    sebastien's Avatar
    sebastien
    sebastien is offline Junior Member
    Join Date
    Apr 2010
    Posts
    12

    Did you find this post helpful? Yes | No

    Default The card

    This pic is on a card with an osc onboard of 6mhz supposed to be ran on 24mhz thanks to hsppl.

    Here is a pdf of the card, (it's in thai) but the last 2 pages are the wiring diagrams.

    http://www.steitec.net/media/product...1249723519.pdf
  2. - 19th April 2010, 15:53 #2
    Kamikaze47's Avatar
    Kamikaze47
    Kamikaze47 is offline Senior Member
    Join Date
    Nov 2005
    Location
    Perth, Australia
    Posts
    429

    Did you find this post helpful? Yes | No

    Default

    Can you post your code and config settings.
    "I think fish is nice, but then I think that rain is wet, so who am I to judge?" - Douglas Adams
  3. - 19th April 2010, 18:09 #3
    sebastien's Avatar
    sebastien
    sebastien is offline Junior Member
    Join Date
    Apr 2010
    Posts
    12

    Did you find this post helpful? Yes | No

    Default Strange

    Came back home and done it over again, played a bit with the config bits and it started to blink with and without adcon, one config bit i have removed was LVP .... that should not interfere execution.;.. but ok it works now thanks for the support.
« Previous Thread | Next Thread »

Members who have read this thread : 1

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules