Start on power up pic16f886

Closed Thread
Results 1 to 5 of 5

Hybrid View

  1. - 15th April 2010, 06:40 #1
    CESSKO's Avatar
    CESSKO
    CESSKO is offline Junior Member
    Join Date
    Apr 2010
    Location
    CROATIA
    Posts
    5

    Did you find this post helpful? Yes | No

    Default Startup trouble

    .But i have Vcc & ground, resistor to Vcc - MCLR, and program,but it doesent want to start,i make it start from PC ,with mplab.(i use pickit-3 ).i was hoping there is some start up bit or.....similar.what could be a problem
    THANKS
  2. - 15th April 2010, 07:01 #2
    mackrackit's Avatar
    mackrackit
    mackrackit is offline SuperMod
    Join Date
    Nov 2003
    Location
    Wellton, U.S.A.
    Posts
    5,924

    Did you find this post helpful? Yes | No

    Default

    When you are trying to start it with out the PicKit3 what are you using for a power supply?
    Dave
    Always wear safety glasses while programming.
  3. - 15th April 2010, 07:18 #3
    CESSKO's Avatar
    CESSKO
    CESSKO is offline Junior Member
    Join Date
    Apr 2010
    Location
    CROATIA
    Posts
    5

    Did you find this post helpful? Yes | No

    Default Startup trouble

    Thanks guys a lot.The problem was i programming it in debugger,and of course wont start,but when i use programmer...whole different story...
    Thanks for quick reply,i am very new in programing,but planning hard work
« Previous Thread | Next Thread »

Members who have read this thread : 0

You do not have permission to view the list of names.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules