ok im using a bs2, to test something, i was using this code,

________________

PAUSE 250
PLS VAR Word

main
PULSIN 15, 1 , pls ' recieve hi pulse store in pls varible
DEBUG pls

GOTO main

__________________


my goal is to see what kind of varible comes up at certian points,, , with pin 15 conected to the signal wire off of a futaba reciever, it seems to work, but this is what the varible reads,

___
0Ëê 3:
 t
___


i was expecting a number read out, around150 , or 1.50 , which would be the pulse that operates a servo, any help turning the jiberish i got into the numbers i expected?i suspect im missing a bit of code, to tell the bs2 how to decipher the signal its recieving

as expected,, i did infact get a change in the out put of the debug terminal, when i controled the reciever via remote , only i am inable to compare the jibberish i got,

fyi using 10 k ohms resistor betweensignal wire and input pin 15 on bs2, plan to build using pic just testing with what i got