Is a good way connect more MCLR between them?

Closed Thread
Results 1 to 1 of 1
  1. - 6th May 2010, 07:41 #1
    Wirecut's Avatar
    Wirecut
    Wirecut is offline Junior Member
    Join Date
    Feb 2007
    Posts
    37

    Default Is a good way connect more MCLR between them?

    Hi,

    it 's a good thing to use the output of the MAX232 DTR to reset the PIC for the bootloader, and use it for more PIC on the same board?

    At present, each PIC has its own 4.7K pull-up resistor and its reset button to tie to GND.

    Can I connect together all the MCLR pins?

    In this way every push button pressed, or DTR change reset all the PIC.

    What appens if I try to program one pic with a programmer like EPIC?


    Ciao

    Leo
    Last edited by Wirecut; - 6th May 2010 at 07:42. Reason: typing error
« Previous Thread | Next Thread »

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules