Cant get it to work

Closed Thread
Results 1 to 24 of 24

Hybrid View

  1. - 9th April 2010, 10:05 #1
    Acetronics2's Avatar
    Acetronics2
    Acetronics2 is offline Fanatical Contributor
    Join Date
    May 2004
    Location
    NW France
    Posts
    3,653

    Did you find this post helpful? Yes | No

    Talking Problem already seen ... ???

    HI, BPWZ

    I can't resist ...

    http://www.picbasic.co.uk/forum/show...95&postcount=6

    Alain
    ************************************************** ***********************
    Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
    ************************************************** ***********************
    IF there is the word "Problem" in your question ...
    certainly the answer is " RTFM " or " RTFDataSheet " !!!
    *****************************************
  2. - 9th April 2010, 10:21 #2
    malc-c's Avatar
    malc-c Guest

    Did you find this post helpful? Yes | No

    Default

    If you have access to another PC then try using the programmer with that. It is a well documented fact that serial ports on a lot (if not most) laptops lack the power that JDM programmers need to generate the programming voltages.

    I can remember having loads of programming issues when I was using a commercial version of this type of programmer with IC-Prog. I've since purchased an EasyPIC board which has a built in programmer and software - which I must say has never let me down.

    If your funds can't stretch to an EasyPIC board, then I too would suggest you look at the picKit2 programmer.
« Previous Thread | Next Thread »

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules