Cant get it to work

Results 1 to 24 of 24

Threaded View

  1. - 8th April 2010, 15:49 #18
    bearpawz's Avatar
    bearpawz
    bearpawz is offline Junior Member
    Join Date
    May 2004
    Posts
    81

    Did you find this post helpful? Yes | No

    Default

    Im at work right now so dont have access to the entire code. I did make this change to the main routine:

    Code:
    Start:
   PortB=0
   pause 500
   portB= $FF
   pause 500
Goto start

    In theory this should toggle all the pins on portB. Unfortunatly, still getting a whole lot of nothing. Im prety sure there is either something wrong with fuse config (will look into the above suggestions when I get home tonight), or maybe its a hardware problem.
    Last edited by bearpawz; - 8th April 2010 at 15:56. Reason: added cide tags
« Previous Thread | Next Thread »

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules