16F876A Pulsin issues

[Bobbo_ZA]

I have an idiot grin on my face, :-) im making some really good progress, I have the pulse in now displaying on the screen (strange from a JR Rx Im getting a range from 560 - 990 from the pulsin) and have the ability to jump to a servo test (sweep from side to side) at the push of a button, :-)

My ADC is sort of working, with the voltage divider I'm getting 2.54V on my DMM, however if I display the ADC input Im only seeing 2 and not the .54 (obviously this will be multiplied by 2 once i get the decimals). I have tried:

lcdout $FE, $C0+8, dec volt

and 

lcdout $FE, $C0+8, # volt

but still only get the first digit. Is this due to the ADC VAR being a "WORD"

Volt    Var     WORD
.
.
.
ADCIN 4, volt
.
.
.

My Vref from the regulator is 5.00V on my DMM

Not sure im getting this whole ADC concept, I;ve read another one of Melanie's posts and from what I can work out, my RAW ADC in variable should be as follows:

if my Vref = 5.00 then if my ADCIN was exactly 5.00V the ADC result would give me 1024, however I am giving a ADC of 2.54 I should get a value in the variable of 520? however I am displaying a single digit "2" on the LCD with the code above, not sure how to do the math on this.