Hi all,
Been having problems with EEPROM locations getting overwritten.

Device is 18F2620
We run interrupts from pbp (ON INTERRUPT GOTO ...)
Now re-reading the pbp manual we find that we should have been masking interrupts before WRITEing. ahhemm, well we do now....

We have used the DEFINE WRITE_INT 1 which appears to have cured the problem, so check your code.

Is there any other tips for reliable EEPROM data management you would like to suggest?

I have been told that to allways follow a READ or WRITE with a PAUSE. This may date back from the original flash devices being slow (16F84) and i'm unsure as to how valid this information is and should I worry with 18F's

Thanks,
Tim.