Interrupt won't execute.

Results 1 to 24 of 24

Threaded View

  1. - 25th March 2010, 10:27 #15
    Acetronics2's Avatar
    Acetronics2
    Acetronics2 is offline Fanatical Contributor
    Join Date
    May 2004
    Location
    NW France
    Posts
    3,653

    Did you find this post helpful? Yes | No

    Thumbs down

    Hi, Jumper

    DT Basic Interrupts are wayyy too slow, here ... and overall their execution time is not predictable for timing corrections ...

    so, no joy nor !

    You do have to deal with ASM ... or write the program in pure PBP, without any interrupts ...

    Alain

    PS: and do not forget DT Bas ints consume a lot of RAM ...

    @ BB

    Does this mean there's another way of doing this without interrupts?

    Bear in mind that I need to expand this to running two servos at once.
    I alredy built a 4 channels fail-safe in pure PBP ... 4 Channels to read and 4 channels to output ... so, your project looks quite doable.
    Writing a neat timechart ... of course.
    Last edited by Acetronics2; - 25th March 2010 at 10:33.
    ************************************************** ***********************
    Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
    ************************************************** ***********************
    IF there is the word "Problem" in your question ...
    certainly the answer is " RTFM " or " RTFDataSheet " !!!
    *****************************************
« Previous Thread | Next Thread »

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules