Trouble starting PIC or internal clock on 12f683?

[mackrackit]

The only way I can get it to start is with this:

@ __config _INTOSCIO & _WDT_ON & _MCLRE_OFF & _CP_OFF

Now that it starts, there is still an issue with it. I get output pulses on servos 2-4, but not on servo1. The pulses that I do get do not vary with the input pulses, they are just 2ms on 3 & 4, and 1.6 ms on 2.

I'll check to see if there is anything wrong with my setup and wiring again.

I have not had a chance to look at the data sheet but you OSC setting is bothersome.
That outputs a clock signal I think???