New approach to Rotary Encoder

[Heckler]

Thanks! Aratti...

I had just finished adapting your earlier example for a 16F690 pic. It took me a while to figure out why my LCD was not working... Dang MCLR pin tripped me up untill I rememberd that it could not act as an output... then I had to move my LCD to PortC... then I had to figure out that my OLD 4 line LCD (bought it about 20 Years ago from AllElectronics) needed more time on the LCD_COMMANDUS.

Anyway it is working GREAT...
I will give your latest code a spin this weekend.

As far as update time to the LCD... it seems to be limited to any Pause or other code that is in the Main Loop. I had been blinking an LED in the main loop using a Pause statement and therefore this limited the LCD update frequency. I think I'll try and impliment another DT-Int using a timer to run the blinking LED in the main loop. This should remove any excessive delay to the LCD update.

PS. I can post Aratti's modified working code for the 16F690 if anybody is interested...