12C671 - GP3 problem

Results 1 to 37 of 37

Threaded View

  1. - 17th March 2010, 13:20 #8
    Acetronics2's Avatar
    Acetronics2
    Acetronics2 is offline Fanatical Contributor
    Join Date
    May 2004
    Location
    NW France
    Posts
    3,653

    Did you find this post helpful? Yes | No

    Unhappy Too bad

    Quote Originally Posted by financecatalyst View Post
    Hi, for some reason when I check the voltage on all pins, every pin except GP3 has 5V, whereas I don't know why GP3 is showing only 0.5V. They all are held high (5V) with 10K.

    .
    That looks much like a fried pin ... as it is an " input only " pin ...
    You have to take care of these pins ... cause there's no clamping diode to VDD : must be treated as a full CMOS input with antistatic discharges handling precautions.

    Alain
    Last edited by Acetronics2; - 17th March 2010 at 13:45.
    ************************************************** ***********************
    Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
    ************************************************** ***********************
    IF there is the word "Problem" in your question ...
    certainly the answer is " RTFM " or " RTFDataSheet " !!!
    *****************************************
« Previous Thread | Next Thread »

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules