Thankyou for ur advice on GSM module but i think i can easily get 6210/6310 nokia in my country, how do i test whether it supports AT commands?, will it be affected by the baud rate i set at 9600?
phone interface
Thankyou for ur advice on GSM module but i think i can easily get 6210/6310 nokia in my country, how do i test whether it supports AT commands?, will it be affected by the baud rate i set at 9600?
It does support the full AT commands from Nokia. you have to find that AT command manual though.
You will also need a specific cable from Nokia to RS-232.
Ioannis
phone interface
I have found that i can use DLR3 cable, trying to look for and test
regards
dumato
Hyperterminal
When i connnect the phone to the PC and test the cable with hyperterminal, there is no response thats no ERROR or OK, what could be the problem,
I used the following commands at the hyperterminal,
AT
I expected OK or ERROR but its blank
AT+CPIN?
I expected +CPIN? READY OR ERROR but blank also
Could it be the cable?, PC or settings of PC, pliz guide me.
regards
dumato
hyperteminal
Thankyou Ioannis; i have tried to change the baud rates but still no response.
regards
dumato
Usually the baud is at 9600 by default.
Also USB to Serial converters may pose an issue sometimes.
Ioannis
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks