PLIZ CHECK MY SCHEMATIC,pic16f84->max232->gsm phone

[Ioannis]

Hi Al.

Your project related to GSM remote control has been down. Are you aware of it?

Ioannis

[aratti]

.... Are you aware of it?

Yes! I will upload it in the new forum as soon as I understand how does it work.

Al.

[dumato52]

Thankyou for ur advice on GSM module but i think i can easily get 6210/6310 nokia in my country, how do i test whether it supports AT commands?, will it be affected by the baud rate i set at 9600?

[Ioannis]

It does support the full AT commands from Nokia. you have to find that AT command manual though.

You will also need a specific cable from Nokia to RS-232.

Ioannis

[dumato52]

I have found that i can use DLR3 cable, trying to look for and test
regards
dumato

[dumato52]

When i connnect the phone to the PC and test the cable with hyperterminal, there is no response thats no ERROR or OK, what could be the problem,
I used the following commands at the hyperterminal,

AT
I expected OK or ERROR but its blank
AT+CPIN?
I expected +CPIN? READY OR ERROR but blank also

Could it be the cable?, PC or settings of PC, pliz guide me.
regards
dumato

[Ioannis]

A million reasons!

Maybe the baud rate?

Ioannis