I can not figure out an LCD issue

[lilimike]

Dave,
I have tried
DEFINE LCD_COMMANDUS 1000 and 4000
DEFINE LCD_DATAUS 25 and 100
with no aparent changes.

Malcom,
The display does work at 8 MHz with a 4 MHz resonator but the chip's timing is doubled and that is what I am trying to figure out. so a PAUSE 1000 will last 2 seconds instead of 1 second. The timing for this project is important because I want to build an ultrasound distance mesurement and so I have to time the echo received after sending an output burst of 40 KHz. I think I am far from my goal but I can't get started with the fun part untill I have figured out my issue with the timing problem.

Alain,
What did you mean by this?

may be the missing LCD Settling time @beginning of the program ???

For the record this is my hardware configuration and with an oscilloscope I see the 5V as pure DC 5.12V