PIC12F675 and ADCIn

[Peter1960]

Hi,
I am using the ADCIN feature and have a q?

I set

ANSEL = 7 so to set AN0,1,2 to Analogue and AN3 to Digital

ADCIN 0 for AN0
ADCIN 1 for AN1
ADCIN 2 for AN2

however I can only get feedback from AN0 and AN1 but not from AN2?

I can provide complete code if required

regards

[Peter1960]

OOps,

If you want the data to be read you must store in the same place!

I set the reading of ADCIN 3, Result_Ch2

Where as it should be ADCIN 3, Result_Ch3

Must be getting late!

[BobEdge]

Hi Pete,

Could you please post your code, as i wish to use the 675 A/D myself, but am having trouble initialiaing it all. Have not used one of these little pics before.

I am wanting to use 1 analog input, 2 digital inputs, and 2 outputs.

Regards

Bob.....

[Peter1960]

Hi Bob,

Will post the the file when I get back to work on Monday.

I'll probably forget, so if you dont see, just ask me again.

regards