|
I discovered the capacitive sensing module and have added:
CPSCON0.7=0 to turn it off.
The effect was that the one working channel continues to work.
The pot on AN6 also now works.
But now all the other four channels lock high at power-up, even with no signal, and stay there.
I guess that's a tiny speck of progress.
Last edited by RussMartin; - 25th February 2010 at 05:13.
Russ
N0EVC, xWB6ONT, xWN6ONT
"Easy to use" is easy to say.
|
I have had trouble in the past with the built in ADC commands.
You may want to try the method used here.
http://www.picbasic.co.uk/forum/show...2&postcount=16
Dave
Always wear safety glasses while programming.
|
I've also tried to make sure the CCP/ECCP modules were off by adding:
CCP1CON=%00000000
CCP2CON=%00000000
CCP3CON=%00000000
CCP4CON=%00000000
No change from previous result.
Russ
N0EVC, xWB6ONT, xWN6ONT
"Easy to use" is easy to say.
Members who have read this thread : 2You do not have permission to view the list of names.
Posting Permissions
Bookmarks