Serin EEPROM Programmer

Results 1 to 12 of 12

Threaded View

  1. - 24th February 2010, 23:12 #11
    aratti's Avatar
    aratti
    aratti is offline Senior Member
    Join Date
    May 2008
    Location
    Italy
    Posts
    825

    Did you find this post helpful? Yes | No

    Default

    The USB2SER is not able to program BASIC Stamp® microcontroller modules. BASIC Stamp modules
    require an inverted signal. If you need to program a BASIC Stamp use the FTDI USB to Serial Adapter
    The above is from USB2SER data sheet, and it seems you should use TRUE STATE. Tray to change to:

    serin GPIO.1, 2, val

    and

    serout GPIO.2, 2, [val]

    (see PBP manual pag 130)

    Al.
    Last edited by aratti; - 24th February 2010 at 23:27.
    All progress began with an idea
« Previous Thread | Next Thread »

Similar Threads

  1. Can't read sequential addresses in external EEPROM
    By tjkelly in forum mel PIC BASIC Pro
    Replies: 2
    Last Post: - 18th February 2010, 15:46
  2. Problem with I2C EEPROM addressing
    By Atom058 in forum General
    Replies: 14
    Last Post: - 3rd November 2009, 04:17
  3. Data EEPROM gets clobbered during programming
    By BrianT in forum mel PIC BASIC Pro
    Replies: 5
    Last Post: - 18th July 2008, 03:46
  4. How to write/read strings EEPROM/LCD
    By g-hoot in forum mel PIC BASIC Pro
    Replies: 22
    Last Post: - 11th February 2007, 07:26
  5. word variable to 25lc640
    By TONIGALEA in forum mel PIC BASIC Pro
    Replies: 5
    Last Post: - 6th July 2004, 20:59

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules