4 Channel Thermostat using PID loops

Results 1 to 37 of 37

Threaded View

  1. - 15th July 2010, 21:57 #19
    malc-c's Avatar
    malc-c Guest

    Did you find this post helpful? Yes | No

    Default MKII prototype - Low Voltage Side Works !

    Well I've just completed the two boards in the MKII prototype, and was pleased to find that when I plugged the mains lead in there was no bang, no smoke but the thing actually powered up and displayed temperatures on all 4 inputs with the LEDs flashing away indicating the outputs were also running.

    All that's needed now is to make up the sensor leads properly, fit the correct 3 core cable for the supply and hook up the output board to the controller via 7 way cable - then install it and monitor how it performs...

    I'll post up a few more photo's as the installation progresses.

    Attached Images Attached Images   
« Previous Thread | Next Thread »

Similar Threads

  1. Simple 4 channel DMX controller
    By eggman in forum Code Examples
    Replies: 19
    Last Post: - 18th July 2012, 02:40
  2. Timer + rc5
    By naga in forum mel PIC BASIC Pro
    Replies: 8
    Last Post: - 19th November 2009, 08:56
  3. 4 pin 4 x 4 keypad interface using pic basic pro
    By dunlao_john in forum mel PIC BASIC Pro
    Replies: 2
    Last Post: - 15th January 2009, 06:21
  4. Microcontroller with 2 way paging application problem
    By oneohthree in forum mel PIC BASIC Pro
    Replies: 30
    Last Post: - 20th April 2007, 18:27
  5. Real Time Clock & Eeprom
    By smart_storm in forum General
    Replies: 8
    Last Post: - 17th February 2006, 20:03

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules