12f675_fuse_about_to_blow!

[LEDave]

Hi mackrackit

Do you want data sent at each sensor trigger?

No I don't think so, a whole days visits in one transmit will do the job.

Have the sensor on one of the pins currently used for a switch.

Well initially I thought ah, just bye-pass the switch then thought I can't do that as it's in series with the pin but once again you inspire me mackrackit, RA3 / 4 bye-pass the switches straight onto GPIO.3 / 4 the switches are connected to ground when pressed (if that makes sense) so looking good to go.

That bird doing the feeding better not fall into the nest, it might end up being lunch...

I know, you gotta feel for the feeder, overworked or what

I almost forgot, I've had a look at RS / Maplins for a product similar to header J3, it would be really handy to be able to just plug the RX / TX modules in and out but can't find anything, I'm going to email Microchip and ask them for a UK supplier and spec.

Dave