12f675_fuse_about_to_blow!

[LEDave]

I would say now on the VB part to start with a simple terminal type program to display the serial data like Serial Communicator does.

Ok, I'll stick with / at it and see what I can come up with.

Dave

[LEDave]

Hi mackrackit,

Just to let you know I've been spending hours going through the VB exercises and taking notes in the hope that I'll eventually be able to get the PIC - VB program working.

Although it's time consuming, it's not time wasted in my view as there are some of the basics I still don't fully understand.

Dave

[mackrackit]

Have you ran across any good VB forums yet?

[LEDave]

Hi mackrackit,

I've just posted a question on the PIC / VB thread.

http://www.picbasic.co.uk/forum/show...3080#post93080

Have you ran across any good VB forums yet?

I'm must have been through half of Google HDD's trying to find a 'ready made' solution, I never thought to actually 'join' a VB Forum

Dave

[mackrackit]

If you are interested I started some Python stuff at the web site in my signature.
I will be adding more as time permits.

[LEDave]

Hi mackrackit,

If you are interested I started some Python stuff at the web site in my signature.

Short answer is yes I am interested and thanks for posting the link. Right now I've managed to get a VB-2008 program to open and close Port_Com1 when I run debug, which is a breakthrough. If I can get it to receive data from the PIC then....... But so far no luck....

Give me a few more days to try and crack it, if I can't I'll jump ship to Python (I might do that anyway).

It's a shame that the 'RENTRON'? "Receiving Data From A Microcontroller" program was a different VB version, I'd just about got a handle on it in the broadest of senses, ho hum.

The VB stuff has been good for me though, it shows up the gaping wholes in my knowledge bank, you really can't run before you can walk with this stuff. Ill keep taking the small steps though.

Just to add, when I open Com1 in VB, then try to open Com1 with serial Communicator, it show the Port in use. When I close Com1 in VB, I can then open it with the Serial Communicator. I'm using this as a test / check.

How big a step forward is getting the Com Port to open and shut?

Cheers: Dave

[mackrackit]

How big a step forward is getting the Com Port to open and shut?

Sounds like you are getting there.

I did download VB 2010, looked at it a bit, watched a tutorial or two, and shut it down.

If you are learning from scratch and do not mind windows only then keep at it. IMHO