12f675_fuse_about_to_blow!

Results 1 to 40 of 929

Threaded View

  1. - 10th April 2010, 23:02 #24
    LEDave's Avatar
    LEDave
    LEDave is offline Senior Member
    Join Date
    Feb 2010
    Location
    I live in the UK
    Posts
    562

    Did you find this post helpful? Yes | No

    Default

    I loaded the program and setting is : com1 : 2400baud : No parity :byte size 8 : 1 stop bit.

    I typed 3 into the transmit window (it shows a flashing green connected bottom left hand side of screen) and at the bottom middle is says bytes TX: 1 : bytes RX:0

    After a while though it suddenly said: TX: 1 RX: 330 and a row of 'yyyyyy's in the received box.

    I've tried it several times since though and back to: TX1 RX:0

    So nearly there? Very exciting though I must say.I feel like Marconi....

    Also the LED's on GPIO.5 didn't light up.
    Last edited by LEDave; - 10th April 2010 at 23:18.
« Previous Thread | Next Thread »

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules