Lets say you are sending "3" from the PC
Code:MYVAR VAR BYTE serin2 GPIO.0, 2400,[DEC MYVAR] IF MYVAR = 3 THEN HIGH GPIO.5You will do that in the terminal program.Also, the Port (com1) settings are: 9600 bps 8N1. Do I need to change that to 2400?
|
Lets say you are sending "3" from the PC
Code:MYVAR VAR BYTE serin2 GPIO.0, 2400,[DEC MYVAR] IF MYVAR = 3 THEN HIGH GPIO.5You will do that in the terminal program.Also, the Port (com1) settings are: 9600 bps 8N1. Do I need to change that to 2400?
Dave
Always wear safety glasses while programming.
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks