|
Once again thanks to everyone for their input and help.
It's looking like PICBASIC PRO Compiler 2.60 is the one to aim for right?
I appreciate the learning curve I have to work through but I am a plodder and will gradually build up my knowledge base (along with one or two questions on here no doubt).
Any other areas I should look into to start the learning process?
Many thanks: Dave
|
Many will buy books to start learning, so far in my opinion there are not any out there worth anything. Bruce is working on one, when it comes out I will change my mind. Until then his site is a good place. Left hand side about half way down.
http://rentron.com/
Examples to work on from MeLabs, along with the PBP manual.
http://www.melabs.com/resources/samples.htm
And of course this forum. Steve put this post together just for this purpose.
http://www.picbasic.co.uk/forum/showthread.php?t=11116
And do not forget to have the data sheet for the PIC you plan to use handy.
That should get you started.
Last edited by mackrackit; - 17th February 2010 at 02:33.
Dave
Always wear safety glasses while programming.
|
Download the PBP demo: http://www.melabs.com/pbpdemo.htm
You can make enough, in short order, just by selling nifty things you create with the PBP
demo, to buy the full version. I personally know several college students that have used
the demo version to make a fortune.
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks