I've just had a thought.
It's probably dangerous for me to offer advice right now, no matter how well intensioned. As some of my conclusions maybe a little off the mark.
Dave
|
I've just had a thought.
It's probably dangerous for me to offer advice right now, no matter how well intensioned. As some of my conclusions maybe a little off the mark.
Dave
|
Most of mine are, does not stop me...Originally Posted by LEDave
LCD... Back-light would be nice but I did not see very many options from your supplier. So that is why I was looking at one with four lines.
Dave
Always wear safety glasses while programming.
|
Most of mine are, does not stop me...
In the LCD product spec page (15/17) it says:LCD... Back-light would be nice but I did not see very many options from your supplier. So that is why I was looking at one with four lines.
So maybe it does have a backlight?(8) In particular do not forcibly bend the I/O cable or the backlight cable.
That's for the display we were looking at:
http://uk.rs-online.com/web/search/s...duct&R=5326795
Page (15/17) in here:
http://docs-europe.origin.electrocom...6b806dda19.pdf
Dave
Last edited by LEDave; - 29th March 2010 at 18:14.
|
It also list specs for a LED and EL back light.
So I am not sure. Might be worth contacting them to find out.
Dave
Always wear safety glasses while programming.
|
I'll try and contact the technical department tomorrow.Might be worth contacting them to find out.
So what exactly are we after here? I'll try and find out if this one anything else they have exactly fits the bill.
Dave
|
I would look for one with LED back light. I think 16x4 is nice for one to use on the bench, but a 20x2 would also be OK, IMO.
Dave
Always wear safety glasses while programming.
|
So I'm after a 16x4 LED backlight LCD.
Any other spec I should make sure it has?
Dave
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks