RTC module - Easypic5

Results 1 to 12 of 12

Threaded View

  1. - 5th February 2010, 20:19 #7
    malc-c's Avatar
    malc-c Guest

    Did you find this post helpful? Yes | No

    Default pin outs

    Quick question, I'm having problems reading the schematic of the board http://www.mikroe.com/pdf/rtc2_schematic_v100.pdf

    The board doesn't have the 3 x 2 header shown, just the 5 x 2 which connects to the easypic5. As I need to breadboard these modules to connect to the spare pins I'll have and not take up a full port can some one tell me what pins on the 5 x 2 header I need to connect to the PIC (other than supply )

    EDIT: - just looked at the code and previous replies... RC3 and RC3 are suggested, so that would be pins 4 and 5 on the header
    Last edited by malc-c; - 5th February 2010 at 20:29.
« Previous Thread | Next Thread »

Similar Threads

  1. Version Control
    By btaylor in forum mel PIC BASIC Pro
    Replies: 33
    Last Post: - 16th October 2011, 17:12
  2. GPS Tracker Project ( GPS Module + JP Module + LCD Dispaly )
    By Oldspring in forum GPS
    Replies: 1
    Last Post: - 27th July 2008, 06:14
  3. Oscillator stops when touching with a wire
    By Wilbert Ingels in forum mel PIC BASIC Pro
    Replies: 23
    Last Post: - 25th April 2008, 08:51
  4. PIC 16F877 I2C communications
    By sigmoideng in forum General
    Replies: 7
    Last Post: - 13th July 2007, 10:28
  5. X1226 RTC - Help
    By charudatt in forum mel PIC BASIC Pro
    Replies: 2
    Last Post: - 14th August 2006, 17:54

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules