Quote Originally Posted by Angelica
Hi, i want change NMEA for TSIP output of my GPS lassen SQ

I go to the tsip104 in DOS and set te configuration but ehn i press enter show me
....waiting for reply(0x7B)
and never change

Please Help me

Thank you very much
What this means, is that the unit is at a different baud rate than the terminal program. Are you getting any legible data on the screen? If so, what speed id TSIPchat running at? If you don't know, or are gettong garbage, you can change the TSIP comms speed until you get data. Next, do a software reset, and that should bring you back to factory default. Next, try again. When you change from TSIP protocol to Ascii, you will not get a legible ack from the module. See if the change worked, and don't worry about a reply...

Ron