Quote Originally Posted by Angelica
Hello. I´m working with a GPS lassen sq, and i conect the gps to max 232 and connect this to the serial port, but i run the SQ Monitor and don't have results. You can tell me how is the correct connection of the GPS and de serial port.

Thank you very much
Hello Angelica,

I really haven´t worked in a similar proyect. But in the next internet address you can get the next documents:
- Lassen iQ Pin connections.PDF, this document describes how connect the Lassen iQ/SQ when the RX´s pins aren´t used to communications. You need to know that there are a difference between the connections when you programm the Lassen iQ/SQ and when you use it to report GPS messages.
- Lassen-IQ GPS EVK Schematic.PDF, this document describes how connect the Max232 to Lassen iQ/SQ and Max232 to PC.
There are other documents that can help you in the same address.


http://www.sparkfun.com/shop/index.p...385401&cat=63&

in other case you can access with "www.sparkfun.com" and go to "GPS" and next to "Modules".