CAN bus with 18F258&MCP2551?

Closed Thread
Results 1 to 1 of 1
  1. - 14th February 2010, 16:27 #1
    zx81sp's Avatar
    zx81sp
    zx81sp is offline Junior Member
    Join Date
    Apr 2009
    Posts
    15

    Default CAN bus with 18F258&MCP2551?

    Hi

    I've a small proto board (without datasheet) and I'm trying to make a very simple app but I don't know how to do. It has a 18F258 (20Mhz clock) and MC2551 and I want just send a CAN command, nothing else. I know that the bus works at 100k, can anybody help me? just a help to start


    I've found some samples in the Comm section, but, sincerily, I don't understand how to use the CAN port with PBP.

    Regards
    Last edited by zx81sp; - 14th February 2010 at 16:36.
« Previous Thread | Next Thread »

Similar Threads

  1. RS485 bus - starting probem
    By wurm in forum mel PIC BASIC Pro
    Replies: 4
    Last Post: - 27th January 2010, 13:35
  2. Communicating between two PICs over DC bus
    By elec_mech in forum mel PIC BASIC Pro
    Replies: 2
    Last Post: - 7th May 2009, 12:57
  3. PIC18F97J60 max external bus speed
    By mariusv in forum Documentation
    Replies: 3
    Last Post: - 3rd June 2008, 19:16
  4. Need the code to write to a memory
    By Hamlet in forum General
    Replies: 0
    Last Post: - 20th August 2007, 00:22
  5. Compass module and I2C bus
    By vladimir059@hot in forum mel PIC BASIC Pro
    Replies: 12
    Last Post: - 26th December 2006, 20:29

Members who have read this thread : 1

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules